Current > Home > Logistics container series >> Steel tray
Storage shelf series
Logistics container series
Handling equipment series
Steel tray
How to use the tray: The correct use of the tray should be done by packing the package code on the pallet and adding the appropriate bundles and wraps to facilitate mechanical loading and unloading and transportation to meet the requirements of handling, transportation and storage.
Load mass
The weight of each pallet should be less than or equal to 2 tons. In order to ensure safety during transportation, the height of the center of gravity of the cargo should not exceed two-thirds of the width of the pallet.
a fixed way
The goods carried by the pallets are mainly bundled, glued, stretched and packaged, and can be used together.
Protection and reinforcement
After the goods carried by the pallet are fixed, they still cannot meet the transportation requirements. The protective reinforcement accessories should be selected according to the needs. Reinforced protective accessories are made of paper, wood, plastic, metal or other materials.
1. Master the posture of the end tray.
2. Pay attention to the cleanliness of the tray.
3, according to the end of the different items, choose the appropriate pace of travel.
4, the upper body should be straight when walking, the movement is light and agile.
5, to use the left hand tray, the right hand naturally droops.
6. When walking, the guest needs to stay sideways, smile nod, and greet.
7. During the use of pallets for hydraulic vehicles and forklifts, the distance between the forks should be as wide as possible to the outer edge of the fork of the pallet. The depth of the fork should be greater than 2/3 of the depth of the entire pallet.
8. During the movement of the pallets, the hydraulic trucks and forklifts should maintain a uniform speed forward and backward and up and down to avoid damage to the pallet caused by sudden brakes and sharp turns, causing the cargo to collapse.
9. When the pallet is on the pallet, the pallet should be kept on the shelf beam and the length of the pallet should be more than 50mm of the outer diameter of the shelf beam.